one Do not use abrasives

This applies to both cleaning products and accessories with which you are going to clean surfaces. Do not use hard sponges made of metal and napkins with abrasive elements. They will severely scratch the facades, and in the future, grease and other dirt will accumulate in the recesses that have appeared. Cleaning them up will be even more difficult. Therefore, microfiber, flannel or cloth napkins are suitable for cleaning.

  • 7 proven ways to clean your kitchen countertop from stubborn stains

    Cleaning

    7 proven ways to clean your kitchen countertop from stubborn stains

2 Arm yourself with soft brushes

For areas that are difficult to clean with a tissue, use a brush with very soft bristles. It is suitable for decorative stucco, other outstanding details, as well as small gaps. If there is no suitable brush, take a toothbrush. Be sure to check that it is soft.

pixabay

  • 9 non-obvious items in your home that need to be disinfected

    Cleaning

    9 non-obvious items in your home that need to be disinfected

3 Do not clean furniture with harsh products

Dirt and grease often get on the facades, which are subsequently difficult to clean. However, be careful when choosing chemistry: too harsh compositions can ruin the furniture. For example, facades covered with plastic and finishing film or made of MDF cannot be cleaned with products that contain chlorine.

Usually good manufacturers indicate the means by which furniture can be washed. Pay attention to this list.

  • 5 killer products that will wash grease and dirt from the kitchen apron

    Cleaning

    5 killer products that will wash grease and dirt from the kitchen apron

four Use folk ways

If you are not used to using store-bought compounds, then you can mix a cleaning solution from improvised means. Take hot water and add dishwashing liquid to it in a ratio of 1:2. Or use water and vinegar in the same proportion.

  • How to wash a glossy kitchen: 9 products that will be perfectly clean

    Cleaning

    How to wash a glossy kitchen: 9 products that will be perfectly clean

5 Do not leave the product for a long time

When washing furniture, you can not let the composition soak in, otherwise you can ruin it. Therefore, the cleaning process must be fast. It is better to apply the product first on a damp cloth, and then on the surface of the furniture.

Another piece of advice follows from this: do not apply the composition immediately to all the facades, concentrate on one cabinet. Once you’re done with it, move on to the next one.

  • 9 essentials for a quality cleaning (check what you don't have)

    Cleaning

    9 essentials for a quality cleaning (check what you don’t have)

6 Be careful with fragile hardware

Check what materials furniture fittings are made of. For example, a headset is sometimes decorated with decorative elements and brass handles. This material is very demanding. If chemicals not intended for cleaning get on it, dark spots may appear on the fittings, and the metal itself will change color.

Therefore, approach the cleaning of kitchen facades wisely: consider in advance all the decorative elements and materials from which they are made.

  • 7 interior solutions for the kitchen, which almost everyone regrets

    Kitchen

    7 interior solutions for the kitchen, which almost everyone regrets

7 Don’t forget the glass inserts

If your headset has glass elements, you should clean them as well. This can be done with glass cleaner or the already mentioned solution of vinegar and water. Both of them will cope well with dirt and will not leave streaks.

eight Wipe fasteners dry

Furniture fasteners are usually made of metal. If they get a lot of moisture, they can rust. If they also need cleaning, be sure to wipe the elements dry after cleaning.

pixabay



Оставьте комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *