Any material in construction should be used only where it is justified from a technological point of view. For example, a metal tile, due to a specific device, is used exclusively on pitched roofs with a slope of at least 14 degrees. In some cases, a roof valley is used for ventilation ducts. During installation, it is almost impossible to do this, however, some experts still allow such actions in development, based on personal aesthetic considerations. In this case, there is no guarantee that workers will be able to mount such a unit hermetically and, as a result, leaks may occur.

Water is a source of not only life, but also a fairly large number of problems. For example, washing the foundation contributes to the faster destruction of the house. If moisture penetrates through the roof, the house begins to collapse from the top level. But today, various methods have been developed on how to protect yourself from moisture. It’s about waterproofing.

Brief content of the article:

Waterproofing wiring

There are many options for doing it. It all depends on what material is used in a particular case. The simplest waterproofing is the use of a polyethylene film. But to call such a method modern is definitely impossible. Therefore, it is better to turn to advanced work methods so that roof waterproofing does not become a problem.

Wall soundproofing

Sometimes a relaxing environment is very important. Maybe you want to read a book, or maybe just lie down and enjoy the silence. But it was not there! Constant noise and various sounds heard from the street do not allow you to achieve the necessary degree of concentration? This only says that there are problems with sound insulation in your house that need to be addressed urgently.

It is necessary to carefully examine all rooms for the presence of sound conductors. After all, noise cannot simply pass through walls as if they were not there. You need to examine all the surfaces, study the sockets, the hole for the chandelier, isolate all these points, to begin with.

After taking care of the doors — install doors from dense and heavy trees, making strong and reinforced jambs. Just do the windows — this is the main source of sound from the street. If you can’t close up sockets and so on, then you need to re-align the walls with a special method.

Usually, do-it-yourself soundproofing of a house is carried out by means of drywall sheets, which are superimposed on walls with or without a metal profile.
As a secondary insulation, heaters made from natural minerals are often used, for example, basalt heaters and other materials that are able to absorb and reflect sound waves, ensuring complete silence in the room.


Save the article to your page:

Post published: 02.06

Join the discussion:











Copyright © 2022 LandshaftDizajn.Ru — landscape design portal №1

***Site owned by Maria Kozak






Оставьте комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *