One

Hallways are the last thing people think of when it comes to home design. This is one of the most common renovation mistakes, while the corridor is the first impression of the apartment for guests. For those who have already made this mistake, tiles in the hallway will come in handy — the easiest way to decorate from existing ones.

Decorating the hallway with tiles

Instead of old floorboards or impractical laminate, ceramic tiles for the hallway come in handy. It creates a classic look with traditional patterns that combine sophistication with fashion trends. Win-win in terms of relevance are: Victorian pastels with gilding, black and white checkerboard pattern, ethnic ceramics of Marrakech. You can make the final choice by examining the compatibility of shades on the color map.

Tiles on the walls for the hallway

An overview of the materials that are acceptable for wall tiling in the hallway should begin with already familiar ceramics. If for the floor some of its textures are unsafe due to slipperiness, then they can successfully decorate the walls of the corridor. Modern ceramic tiles in the hallway are not only white, but also colored with imitation of leather, wood, silk or gold leaf. The more complex the decor, the more expensive the tiles with an intricate texture.

Floor tiles for the hallway

The disadvantage of ceramics is its low impact resistance when heavy objects fall. Porcelain stoneware is a little stronger: it is produced using a technology akin to the creation of porcelain. Wear resistance is increased purely by applying paint to each module. In response to the question «how to choose tiles for the floor in the hallway?» any master will advise you to choose between quartz and Korean «gold» tiles from a mix of natural stone, resin granules and polymers. The second type is still little known, but has every chance of overtaking ceramics in popularity.

Ceiling tiles for the hallway

The ceiling is more difficult to decorate than the floor. He often needs additional sound insulation to protect against restless neighbors. Styrofoam, light metal alloys, pressed sawdust are suitable for coating. Hallway tiling can combine several types of textures or levels. Between the two «floors» of the ceiling, it is advantageous to place LED-backlighting, which saves electricity. There is only one nuance to take into account: you can combine levels if gypsum tiles are used.

Styrofoam modules are glued to a pre-leveled and plastered ceiling. They are inexpensive, can often be replaced without much damage to the wallet. Their minus is the shine inherent in expanded polystyrene, which will remove the layer of water-based paint. Dark or light tiles in the hallway are of the following types:

1. Pressed. It is inconvenient, because the thickness of the briquettes cannot vary — it is standard 6-8 mm. The color palette is also limited to exclusively white tone.
2. injection molding. The foam is baked at high temperatures and becomes extra hard by undergoing a two-stage steam treatment. Injection costs more than conventional foam, but its color remains white.
3. Extruding. The only type of foam ceiling that allows you not to limit yourself in choosing a shade due to the fact that a film of any manufacture is glued onto the original briquette of gray tiles in the hallway.

Tiles at the front door in the hallway

The threshold is needed to decorate the entrance area and the door. It is either an element of a wooden box, or is separately created from other materials. The tile threshold in the hallway will become a natural obstacle, a protective barrier against the penetration of street dirt into the housing. It greatly simplifies cleaning, for which only a mop and detergent will be needed. Like any other renovation investment, the threshold does not compromise on quality.

The tiles in the hallway in this area are chosen in dark colors due to their reduced soiling. In the decoration of the threshold, it is impossible to predict exactly how many tiles will be needed — in order to anticipate a possible shortage, you need to buy 5-10% more material than required according to preliminary calculations. Regardless of whether the masonry is done by a professional or a beginner, this will compensate for chips and other possible shortcomings.

Hallway tile design

Comfort is the main indicator when choosing a specific style of the hall. Tiles can be called the most logical way to finish this area, because the conditions for using more fragile materials are too unsuitable. Dirty shoes, wet umbrellas accumulate in the hall: the floor and walls of the room should be ready for regular cleaning and humidity. To decide which tiles to put in the hallway, you need to decide on the future style of the room, the requirements for its operation and design methods.

Gypsum tiles in the hallway

Gypsum is valued for its plasticity, which gives it the ability to design under stone, brick, plaster. The relief surface, although it needs regular cleaning due to the accumulation of dust, can be varnished. When deciding which tile to choose in the hallway, it is important to find out the quality of the manufacturer’s raw materials. The cheaper it is, the faster the gypsum will become unusable. It is combined with other textures to complement wardrobes, fireplaces and telephone tables.

Mirror tiles in the hallway

The most fragile and problematic surface in the apartment to clean is the one made of mirror. Reflection creates a visual impression of a wide space, so tiles in a narrow hallway should be mirrored. The thickness of the mirror does not allow it to be used to decorate walls, so a tile with a facet was invented. It is a product of the technology for the production of ultra-thin briquettes with beveled back. The facet can be attached butt to butt, avoiding wide adhesive seams, to achieve the design idea of ​​a «cast» wall.

Finishing the hallway with clinker tiles

Clinker building materials have been produced since the middle of the last century by firing clay molds at high temperatures. At first it was used for exterior decoration, and later they began to clad the walls inside the apartments. Decorative tile in the hallway made of clinker will fit into the eco-style, because it is completely safe and does not emit toxic substances. The clinker traps UV rays, so it is suitable for interiors in bright colors that require pigment to be applied to the walls.

Marble tiles in the hallway

Natural marble requires care in operation: it can be covered with cracks and scratches when in contact with heels or aggressive chemicals that are sprinkled on the streets in winter. For this reason, decorative wall tiles in the hallway are more profitable than floor tiles. For both types, a preliminary primer will be required to level the surface with concrete. Marble is applied to self-leveling floors with a special glue.

Admirers of this decor know that marble entryway tiles are hard to beat when it comes to luxurious interior decoration. Most of the species sold are made in Italy. Among them, buyers prefer two finishes:

1. Severed sleb. Minimal finishing gives the effect of a raw, rough surface. It does not slip, and therefore has a minimal injury risk. The slab does not need to be regularly polished, which simplifies its care;
2. polished marble. Black and white tiles in the hallway with a glossy finish accentuate the beauty and grain of the stone. To protect against slipping, you can put a door mat.

Regardless of the choice made in favor of a particular surface, you will have to take care of it. Acids, natural fruit juices, dyes should be washed off the floor as soon as possible. For wet cleaning of tiles in the hallway in a bucket of cool water, you need to dilute a small amount of liquid soap. Marble is washed with a mop and left to dry in a draft. To eliminate grease stains, a cleaning powder with a neutral ph level is applied pointwise.

Wood effect tiles in the hallway

Wood is so versatile that it can be made into a material for wall and flooring. It retains heat well, so it will additionally insulate the apartment if the front door lets in the cold. The wall tile for the entrance hall made of wood is hygroscopic, so it is better to choose a variant stylized for it from another material. There are two options — ceramic tiles for the floor, fired in a kiln, and porcelain stoneware «parquet».

Entrance stone tiles

This type of finish is recommended for walls. Porcelain tile in the hallway, imitating stone, is made from:

• cement;
• gypsum;
• quartz agglomerate.

All these products are not inferior in beauty to natural stone, but weigh much lighter. The agglomerate, consisting of a mixture of sand and crushed crumbs of granite, resin, marble, looks as attractive as possible. Its edges play in the light, so it is advisable to place it in close proximity to window openings to create an unusual design. If the tile with a pattern on the hallway floor fades, it is rubbed with a beeswax-based compound.

Cement stone is also made on the basis of sand, but with the addition of gypsum. It is resistant to moisture and has a wide color palette. Its only drawback is the complexity of processing at home. Before laying, cutting is necessary: ​​to minimize the formation of dust, it is produced with a diamond blade. During laying, each tile in the hallway is wetted with water for the same purpose.

Mosaic tiles in the hallway

Mosaic looks better on the floor, but not on the walls, because in the second case it will visually reduce square meters. For those who decide to lay out the drawing on their own, medium-sized samples with an unpretentious pattern are suitable. If you encounter any mistakes that are typical for beginners, it is easier to correct them by combining similar drawings in a modest color scheme. Knowing how to choose tiles in the hallway, you need to lay out the mosaic, starting from the center of the room.

Combined tiles in the hallway

The floor, taking into account the increased patency of the room, must be especially durable and wear-resistant. A combination of tiles in the hallway with laminate can solve this problem. This is the ideal type of zoning of all possible. Ceramic tiles are easy to clean, so they are lined with a threshold, further strengthening the joint of two coatings made of different materials. Tile in a semicircle in the hallway is an example of such a design. In studios, they will allow you to distinguish the hall from the total living area. In order to emphasize this, you will need a tile carpet in the hallway that contrasts with the rest of the coating in color.

The hall is included in the category of premises that need special strength of materials used during repairs. Dirt, dust and slush from the street regularly get on the floor of the corridor, so it will always come into contact with cleaning powders and brushes. Tiles in the hallway must meet these expectations, otherwise the owner of the apartment will be forced to carry out regular replacement of the coating.